Thresholds for post-wildfire debris flows: Insights from the Pinal Fire,Arizona, USA     

Carissa A. Raymond  Luke A. McGuire  Ann M. Youberg  Dennis M. Staley  Jason W. Kean 《地球表面变化过程与地形》2020,45(6):1349-1360

Wildfire significantly alters the hydrologic properties of a burned area, leading to increases in overland flow, erosion, and the potential for runoff-generated debris flows. The initiation of debris flows in recently burned areas is well characterized by rainfall intensity-duration (ID) thresholds. However, there is currently a paucity of data quantifying the rainfall intensities required to trigger post-wildfire debris flows, which limits our understanding of how and why rainfall ID thresholds vary in different climatic and geologic settings. In this study, we monitored debris-flow activity following the Pinal Fire in central Arizona, which differs from both a climatic and hydrogeomorphic perspective from other regions in the western United States where ID thresholds for post-wildfire debris flows are well established, namely the Transverse Ranges of southern California. Since the peak rainfall intensity within a rainstorm may exceed the rainfall intensity required to trigger a debris flow, the development of robust rainfall ID thresholds requires knowledge of the timing of debris flows within rainstorms. Existing post-wildfire debris-flow studies in Arizona only constrain the peak rainfall intensity within debris-flow-producing storms, which may far exceed the intensity that actually triggered the observed debris flow. In this study, we used pressure transducers within five burned drainage basins to constrain the timing of debris flows within rainstorms. Rainfall ID thresholds derived here from triggering rainfall intensities are, on average, 22 mm h⁻¹ lower than ID thresholds derived under the assumption that the triggering intensity is equal to the maximum rainfall intensity recorded during a rainstorm. We then use a hydrologic model to demonstrate that the magnitude of the 15-min rainfall ID threshold at the Pinal Fire site is associated with the rainfall intensity required to exceed a recently proposed dimensionless discharge threshold for debris-flow initiation. Model results further suggest that previously observed differences in regional ID thresholds between Arizona and the San Gabriel Mountains of southern California may be attributed, in large part, to differences in the hydraulic properties of burned soils. © 2019 John Wiley & Sons, Ltd.  相似文献   

Travel times for snowmelt-dominated headwater catchments: Influences of wetlands and forest harvesting,and linkages to stream water quality     

Jason A. Leach  James M. Buttle  Kara L. Webster  Paul W. Hazlett  Dean S. Jeffries 《水文研究》2020,34(10):2154-2175

The time it takes water to travel through a catchment, from when it enters as rain and snow to when it leaves as streamflow, may influence stream water quality and catchment sensitivity to environmental change. Most studies that estimate travel times do so for only a few, often rain-dominated, catchments in a region and use relatively short data records (<10 years). A better understanding of how catchment travel times vary across a landscape may help diagnose inter-catchment differences in water quality and response to environmental change. We used comprehensive and long-term observations from the Turkey Lakes Watershed Study in central Ontario to estimate water travel times for 12 snowmelt-dominated headwater catchments, three of which were impacted by forest harvesting. Chloride, a commonly used water tracer, was measured in streams, rain, snowfall and as dry atmospheric deposition over a 31 year period. These data were used with a lumped convolution integral approach to estimate mean water travel times. We explored relationships between travel times and catchment characteristics such as catchment area, slope angle, flowpath length, runoff ratio and wetland coverage, as well as the impact of harvesting. Travel time estimates were then used to compare differences in stream water quality between catchments. Our results show that mean travel times can be variable for small geographic areas and are related to catchment characteristics, in particular flowpath length and wetland cover. In addition, forest harvesting appeared to decrease mean travel times. Estimated mean travel times had complex relationships with water quality patterns. Results suggest that biogeochemical processes, particularly those present in wetlands, may have a greater influence on water quality than catchment travel times.  相似文献   

Late Quaternary sea‐level change and evolution of Belfast Lough,Northern Ireland: new offshore evidence and implications for sea‐level reconstruction     

Ruth M. K. Plets  S. Louise Callard  J. Andrew G. Cooper  Joseph T. Kelley  Daniel F. Belknap  Robin J. Edwards  Antony J. Long  Rory J. Quinn  Derek W. T. Jackson 《第四纪科学杂志》2019,34(4-5):285-298

The interplay of eustatic and isostatic factors causes complex relative sea‐level (RSL) histories, particularly in paraglacial settings. In this context the past record of RSL is important in understanding ice‐sheet history, earth rheology and resulting glacio‐isostatic adjustment. Field data to develop sea‐level reconstructions are often limited to shallow depths and uncertainty exists as to the veracity of modelled sea‐level curves. We use seismic stratigraphy, 39 vibrocores and 26 radiocarbon dates to investigate the deglacial history of Belfast Lough, Northern Ireland, and reconstruct past RSL. A typical sequence of till, glacimarine and Holocene sediments is preserved. Two sea‐level lowstands (both max. ?40 m) are recorded at c. 13.5 and 11.5k cal a bp . Each is followed by a rapid transgression and subsequent periods of RSL stability. The first transgression coincides temporally with a late stage of Meltwater Pulse 1a and the RSL stability occurred between c. 13.0 and c. 12.2k cal a bp (Younger Dryas). The second still/slowstand occurred between c. 10.3 and c. 11.5k cal a bp . Our data provide constraints on the direction and timing of RSL change during deglaciation. Application of the Depth of Closure concept adds an error term to sea‐level reconstructions based on seismic stratigraphic reconstructions.  相似文献   

Late Cambrian microbial build-ups,Llano Area,Central Texas: A three-phase morphological evolution     

Pankaj Khanna  Heath H. Hopson  André W. Droxler  Dylan A. Droxler  Daniel Lehrmann  Brian Kubik  Jacob Proctor  Pulkit Singh  Paul M. Harris 《Sedimentology》2020,67(2):1135-1160

Although Late Cambrian microbial build-ups were recognized in the Point Peak Member of the Wilberns Formation in Central Texas (USA) nearly 70 years ago, only a few studies focused specifically on the build-ups themselves. This study focuses on the interpretation of the regional (15 measured sections described in literature representing an area of 8000 km²) and local (field and drone photogrammetry studies in a 25 km² area from within south Mason County) microbial build-up occurrence, describes their growth phases and details their interactions with the surrounding inter-build-up sediments. The study establishes the occurrence of microbial build-ups in the lower and upper Point Peak members (the Point Peak Member is informally broken up into the lower Point Peak and the upper Point Peak members separated by Plectotrophia zone). The lower Point Peak Member consists of three <1 m thick microbial bioherms and biostrome units, in addition to heterolithic and skeletal/ooid grainstone and packstone beds. One, up to 14 m thick, microbial unit associated with inter-build-up skeletal and ooid grainstone and packstone beds, intercalated with mixed siliciclastic–carbonate silt beds, characterizes the upper Point Peak member. The microbial unit in the upper Point Peak member displays a three-phase growth evolution, from an initial colonization phase on flat based, rip-up clast lenses, to a second aggradation and lateral expansion phase, into a third well-defined capping phase. The ultimate demise of the microbial build-ups is interpreted to have been triggered by an increase of water turbidity caused by a sudden influx of fine siliciclastics. The lower Point Peak member represents inner ramp shallow subtidal and intertidal facies and the upper Point Peak member corresponds to mid-outer ramp subtidal facies. Understanding the morphological architecture and depositional context of these features is of importance for identifying signatures of early life on Earth.  相似文献   

The Dual-Domain Porosity Apparatus: Characterizing Dual Porosity at the Sediment/Water Interface     

Courtney R. Scruggs  Martin Briggs  Frederick D. Day-Lewis  Dale Werkema  John W. Lane Jr 《Ground water》2019,57(4):640-646

The characterization of pore-space connectivity in porous media at the sediment/water interface is critical in understanding contaminant transport and reactive biogeochemical processes in zones of groundwater and surface-water exchange. Previous in situ studies of dual-domain (i.e., mobile/less-mobile porosity) systems have been limited to solute tracer injections at scales of meters to hundreds of meters and subsequent numerical model parameterization using fluid concentration histories. Pairing fine-scale (e.g., sub-meter) geoelectrical measurements with fluid tracer data over time alleviates dependence on flowpath-scale experiments, enabling spatially targeted characterization of shallow sediment/water interface media where biogeochemical reactivity is often high. The Dual-Domain Porosity Apparatus is a field-tested device capable of variable rate-controlled downward flow experiments. The Dual-Domain Porosity Apparatus facilitates inference of dual-domain parameters, i.e., mobile/less-mobile exchange rate coefficient and the ratio of less mobile to mobile porosity. The Dual-Domain Porosity Apparatus experimental procedure uses water electrical conductivity as a conservative tracer of differential loading and flushing of pore spaces within the region of measurement. Variable injection rates permit the direct quantification of the flow-dependence of dual-domain parameters, which has been theorized for decades but remains challenging to assess using existing experimental methodologies.  相似文献   

Petrogenesis of lunar impact melt rock meteorite Oued Awlitis 001     

Axel Wittmann  Randy L. Korotev  Bradley L. Jolliff  Kunihiko Nishiizumi  A. J. Timothy Jull  Marc W. Caffee  Michael Zanetti  Anthony J. Irving 《Meteoritics & planetary science》2019,54(10):2167-2188

Oued Awlitis 001 is a highly feldspathic, moderately equilibrated, clast‐rich, poikilitic impact melt rock lunar meteorite that was recovered in 2014. Its poikilitic texture formed due to moderately slow cooling, which judging from textures of rocks in melt sheets of terrestrial impact structures, is observed in impact melt volumes at least 100 m thick. Such coherent impact melt volumes occur in lunar craters larger than ~50 km in diameter. The composition of Oued Awlitis 001 points toward a crustal origin distant from incompatible‐element‐rich regions. Comparison of the bulk composition of Oued Awlitis 001 with Lunar Prospector 5° γ‐ray spectrometer data indicates a limited region of matches on the lunar farside. After its initial formation in an impact crater larger than ~50 km in diameter, Oued Awlitis 001 was excavated from a depth greater than ~50 m. The cosmogenic nuclide inventory of Oued Awlitis 001 records ejection from the Moon 0.3 Ma ago from a depth of at least 4 m and little mass loss due to ablation during its passage through Earth's atmosphere. The terrestrial residence time must have been very short, probably less than a few hundred years; its exact determination was precluded by a high concentration of solar cosmic ray‐produced ¹⁴C. If the impact that excavated Oued Awlitis 001 also launched it, this event likely produced an impact crater >10 km in diameter. Using petrologic constraints and Lunar Reconnaissance Orbiter Camera and Diviner data, we test Giordano Bruno and Pierazzo as possible launch craters for Oued Awlitis 001.  相似文献   

Integrated UAS and LiDAR reveals the importance of land cover and flood magnitude on the formation of incipient chute holes and chute cutoff development     

Quinn W. Lewis  Douglas A. Edmonds  Brian J. Yanites 《地球表面变化过程与地形》2020,45(6):1441-1455

Meandering river sinuosity increases until the channel erodes into itself (neck cutoff) or forms a new channel over the floodplain (chute cutoff) and sinuosity is reduced. Unlike neck cutoff, which can be measured or modelled without considering overbank processes, chute cutoff must be at least partially controlled by channel-forming processes on the floodplain. Even though chute cutoff controls meandering river form, the processes that cause chute cutoff are not well understood. This study analyses the morphology of two incipient chute cutoffs along the East Fork White River, Indiana, USA, using high temporal and spatial resolution UAS-based LiDAR and aerial photography. LiDAR and aerial imagery obtained between 1998 and 2019 reveals that large scour holes formed in the centre of both chutes sometime after chute channel initiation. A larger analysis within the study watershed reveals that scour holes within incipient chutes can be stable or unstable, and tend to stabilize when the chute is colonized by native vegetation and forest. When the scour holes form in farmed floodplain, they enlarge rapidly after initial formation and contribute to complete chute cutoff. In addition, this study shows that the formation of scour holes can occur in response to common, relatively low-magnitude floods and that the amount of incipient chute erosion does not depend on peak flood magnitude. The role of scour holes in enlarging chute channels could be an important mechanism for chute channel evolution in meandering rivers. This study also confirms that understanding the relationships among flow, land cover, and cutoff morphology is substantially improved with on-demand remote sensing techniques like integrated UAS and LiDAR. © 2020 John Wiley & Sons, Ltd.  相似文献   

A probabilistic framework for improving reverse geocoding output     

Zhengcong Yin  Daniel W. Goldberg  Tracy A. Hammond  Chong Zhang  Andong Ma  Xiao Li 《Transactions in GIS》2020,24(3):656-680

Reverse geocoding, which transforms machine‐readable GPS coordinates into human‐readable location information, is widely used in a variety of location‐based services and analysis. The output quality of reverse geocoding is critical because it can greatly impact these services provided to end‐users. We argue that the output of reverse geocoding should be spatially close to and topologically correct with respect to the input coordinates, contain multiple suggestions ranked by a uniform standard, and incorporate GPS uncertainties. However, existing reverse geocoding systems often fail to fulfill these aims. To further improve the reverse geocoding process, we propose a probabilistic framework that includes: (1) a new workflow that can adapt all existing address models and unitizes distance and topology relations among retrieved reference data for candidate selections; (2) an advanced scoring mechanism that quantifies characteristics of the entire workflow and orders candidates according to their likelihood of being the best candidate; and (3) a novel algorithm that derives statistical surfaces for input GPS uncertainties and propagates such uncertainties into final output lists. The efficiency of the proposed approaches is demonstrated through comparisons to the four commercial reverse geocoding systems and through human judgments. We envision that more advanced reverse geocoding output ranking algorithms specific to different application scenarios can be built upon this work.  相似文献   

A comparison of network model creation algorithms based on the quality of wayfinding results     

Jinwoo Park  Daniel W. Goldberg  Tracy Hammond 《Transactions in GIS》2020,24(3):602-622

Various network model creation algorithms have been introduced to demonstrate a better approximation of the actual walking pattern and to provide a better wayfinding guide. However, it is under‐investigated which algorithm creates the most appropriate indoor navigation network model in the context of wayfinding applications. Due to the lack of discussion, some studies unconsciously extended an algorithm designed for creating an outdoor navigation network model to indoor space applications. This is problematic because indoor space has different spatial contexts from outdoor space, such as non‐linear space and no‐designated walking space. Our solution is to select five well‐known algorithms that have been introduced, to reproduce the algorithm for the automated construction of the indoor navigation network model, and to evaluate the applicability of algorithms for indoor wayfinding applications. This article compares the quality of wayfinding results from the output of the indoor navigation network model against two criteria: route efficiency (i.e., length) and route simplicity (i.e., number of directions). Our statistical analysis illustrates that the visibility graph algorithm is the most appropriate for indoor wayfinding applications.  相似文献   

LA‐ICP‐MS Pb isotope test of meteorite provenance: A terrestrial origin for Lovina     

Christopher R. J. Charles  Phil J. A. McCausland  Donald W. Davis 《Meteoritics & planetary science》2020,55(5):1093-1102

Lovina, classified as an ungrouped ataxite, is controversial and its identity as a meteorite has been questioned. In this work, we use Pb isotopes on targeted troilite nodules in Lovina as a test of its antiquity and provenance. Although precise ages cannot be obtained, LA‐ICP‐MS offers a rapid, straightforward procedure to establish the source of lead, whether ancient (meteoritic) or modern (terrestrial). For nine pristine, unweathered nodules in Lovina, we find a lead isotopic composition of: ²⁰⁶Pb/²⁰⁸Pb = 0.492 ± 0.003 (2σ, MSWD 0.79; 95%) and ²⁰⁷Pb/²⁰⁶Pb = 0.852 ± 0.003 (2σ, MSWD 1.09; 95%) with no detectable uranium. All lead compositions of the troilite fall in the range expected for modern environmental and mantle lead and are distinctly different from the primordial Canyon Diablo Troilite (CDT) composition of ancient meteoritic troilite. Although the origin of Lovina remains unknown, we conclude that lead in the Lovina troilite is unsupported by U decay and originated from a terrestrial source.  相似文献